GCE A Level in Design and Technology (Product Design)
The A-level-equivalent step, and what universities and employers ask for. It is approved for 16 to 18 study, so it can be taken as part of a study programme.
97 providers teach this exact qualification.
South East22
Aylesbury · 2 years
They ask for: 6 in either GCSE Design and Technology, Electronics or Engineering and a good pass in Maths
Bishop Luffa School, Chichester
2 years
They ask for: We ask that students wishing to study A-level courses have a minimum of five GCSEs at grade 5 or above, with either a grade 6 or above in the subjects they wish
Their versionFreeSlough · 2 years
They ask for: Grade 6 in GCSE Product Design plus a grade 5 in GCSE Mathematics. If Product Design is not taken, a grade 6 in Art with a portfolio of Artwork is considered
Their versionFreeAscot · 2 years
They ask for: The minimum entry requirements for Charters Sixth Form can be viewed here: https://www.chartersschool.org.uk/3003/curriculum-offer-and-entry-requirements-2026/s
Chipping Norton · 2 years
Entry requirements not listed.
Their versionFreeDartford Grammar School For Girls
2 years
They ask for: All students joining Year 12 will have achieved: • A minimum of 52 points over 8 GCSE subjects; • A minimum of grade 5 in Mathematics and English Language or En
Epsom · 2 years
They ask for: 4 GSCE Grade A* to C
Their versionFreeAylesbury · 2 years
They ask for: 5 GCSEs grade 9-4 including English Language, in addition Grade 5 in Mathematics.
Their versionFreeReading · 2 years
They ask for: GCSE Maths grade 5 and above. ;GCSE English grade 5 and above. ;GCSE Design Technology (any discipline) grade 5 and above.
Their versionFreeMaidstone · 2 years
They ask for: You do not need to have studied GCSE Design and Technology but should have demonstrated some practical aptitude at Key Stages 3 and 4 in design and manipulative
Their versionFreeMaidstone Grammar School For Girls
Maidstone · 22 months
They ask for: General Sixth Form Entry Requirements: Admission to the Sixth Form will be as a result of applicants achieving a minimum Grade 5 in English Language and Mathema
Their versionFreeNewbury · 37 weeks
They ask for: Grade 9 - 4 or Level 2 Pass in either GCSE Design + Technology or Engineering Manufacturing.
Their versionFreeBracknell · 2 years
They ask for: Prospective students are expected to achieve grade 5 or above in a Design and Technology subject at GCSE; students are also expected to achieve grade 5 or above
Their versionFreeRingwood · 360 hours
They ask for: Average GCSE grade 4.5. Grade 4 in English Language, Grade 4 in English Literature and Grade 4 in Mathematics. Grade 5 or above at GCSE Design & Technology
Their versionFreeSandwich · 2 years
They ask for: 4-5 GCSEs including maths and English at grde 4 (C) or above.
Their versionFree2 years
They ask for: Five GCSEs grade 4 and above, including English & Maths. Minimum of Grade 6 in Design & Technology GCSE.
Folkestone · 2 years
They ask for: Details of entry requirements into the 6th Form and specific subjects are given in our 6th form Prospectus via the website.
Wokingham · 2 years
They ask for: A minimum of 5 GCSEs grades 9-4 plus subject specific entry requirements
Their versionFreeRochester · 2 years
They ask for: 6 in DT OR 6 in Art or 6 in a science
Their versionFreeTunbridge Wells Girls' Grammar School
Tunbridge Wells · 2 years
They ask for: An average overall GCSE point score of at least 6 from their top six GCSE subjects They must also acheive a minimum of grade 5 in English Language or Mathematic
Their versionFreeTunbridge Wells Grammar School For Boys
Tunbridge Wells · 2 years
They ask for: GCSE grade 6 in Design and Technology or Art and Design
High Wycombe · 2 years
They ask for: https://www.whs.bucks.sch.uk/sixth-form/
Their versionFree
East Midlands21
Boston · 2 years
They ask for: 5 x 4-9 GCSE grades including English, Maths and Science. Desirable - Technology or Art based GCSE qualification.
Their versionFreeLincoln · 2 years
They ask for: 11 GSCE Grade 9-4
Their versionFreeCorby · 2 years
They ask for: This course is open to students who have achieved a grade 6 in GCSE Design Technology along with a grade 4 in both English (Language or Literature) and Mathemat
Their versionFreeMarket Rasen · 2 years
They ask for: All applicants will have at least a GCSE grade 4 in Mathematics and English Language or Literature. It will also be required to have gained 4 GCSE passes at eit
Their versionFreeNorthampton · 2 years
They ask for: GCSE English Minimum of grade 5 in one English subject and 4 in the other / GSCE Maths Minimum of grade 5 / GCSE Design Technology Minimum of grade 5
Their versionFreeSleaford · 2 years
They ask for: Minimum entry requirement for level 3 study. Grade B in GCSE Graphics, Product Design or Resistant Materials.
Their versionFreeNottingham · 2 years
They ask for: A minimum of 5 GCSEs including maths and English at grade 4 or above. Grade 5 in GCSE Design and Technology (other considerations can be made).
Their versionFreeMagnus Church of England Academy
Newark · 2 years
They ask for: In order to study at Magnus Academy Sixth Form we have a basic entry requirement of 5 GCSEs A*-C (or equivalent i.e. grade 4 or higher in English and Mathematic
Northampton · 2 years
They ask for: Grade 5 or above, GCSE Graphics and grade 4 in GCSE Mathematics or Grade 5 or above, GCSE Resistant Materials and grade 4 in GCSE Mathematics or Grade 6 in a re
Their versionFreeQueen Elizabeth'S Grammar Alford - A Selective Academy
Alford · 2 years
They ask for: 4 GCSEs at grade 6 or higher with a minimum grade 5 in Maths & English
Their versionFreeLoughborough · 2 years
They ask for: C grade at GCSE in Product Design or a relevant Design and Technology Subject. If you have not studied Product Design at GCSE you will be required to produce a
Their versionFreeMansfield · 2 years
They ask for: Grade 6 in GCSE Resistant Materials, Graphics, or Electronics
Their versionFreeSleaford · 2 years
They ask for: The minimum entry requirements for level 3 academic study apply. Previous successful study of Design & Technology is also required as demonstrable by grade B in
Their versionFreeSleaford · 2 years
They ask for: The minimum entry requirements for level 3 academic study apply. Previous successful study of Design & Technology is also required as demonstrable by grade B in
Their versionFreeSt Mary'S Catholic High School, A Catholic Voluntary Academy
Chesterfield · 78 weeks
They ask for: 6 or above in DT or Merit or above in BTEC Level 2 Engineering.
Their versionFreeMansfield · 2 years
They ask for: Please see attached Prospectus
Their versionFreeGrantham · 2 years
They ask for: • An Attainment 8 (as defined by the DfE) score “Attainment 8” of 55.0 or greater. • Passes at Grades 4-9 in GCSE English Language and Mathematics. • Students w
Their versionFreeNottingham · 18 months
Entry requirements not listed.
Their versionFreeThe Trinity Catholic School A Voluntary Academy
Nottingham · 2 years
They ask for: Grade B at GCSE
Their versionFreeNottingham · 2 years
They ask for: 3 Grade 6s in chosen subjects (or nearest equivalents) + 2 Grade 5s
Their versionFreeWilliam Farr Cofe Comprehensive School
Lincoln · 2 years
They ask for: Entry Requirements - A Level Subjects | William Farr School - http://www.williamfarr.lincs.sch.uk/sixth-form/a-level-subjects
Their versionFree
London13
London · 2 years
They ask for: GCSE Art / Design at grade 6
Their versionFreeLondon · 2 years
They ask for: A minimum of five passes at grade 5 or higher at GCSE, three of which must be a grade 6 or higher. Within these passes there must be a grade 5 or higher in Engl
Their versionFreeUxbridge · 2 years
They ask for: 6 in GCSE Design & Technology and a Grade 5 in GCSE Maths.
Their versionFreeLondon · 2 years
They ask for: Minimum of 5 GCSEs grade 6+ including DT, Maths and English.
Their versionFreeLondon · 2 years
They ask for: Eight or more GCSEs Grades 9-4 including a minimum grade 6 in Design and Technology GCSE.
Pinner · 18 months
They ask for: 5 Grade 5-9 including English and Maths
London · 2 years
They ask for: Grade 6 in DT (Resistant Materials or Graphics)
Their versionFreeLondon · 2 years
They ask for: 5 GCSEs including maths and English at grade 5 or above.
Their versionFreeLondon · 2 years
They ask for: Minimum requirements for all courses are a Grade 5 or above in English and Maths Five GCSEs at Grade 6. Students must be taking at least 7 GCSE's Entry criteria
Their versionFreeLondon · 18 months
They ask for: 6 in Graphics or Product Design (Can show evidence through art portfolio if not previously studied) To gain entry to the Sixth Form students must have a minimum
Their versionFreeThe Coopers' Company and Coborn School
Upminster · 2 years
They ask for: At least 8 grade 9-5 GCSEs including Maths and English Language. A grade 5 in GCSE Design and Technology
Their versionFreeWallington High School For Girls
Wallington · 24 months
They ask for: You are required to be a full time member of WHSG Sixth Form. The minimum requirement for entry to the Sixth Form at Wallington High School for Girls is an aver
Their versionFreeWoodford Green · 2 years
They ask for: A GCSE points score of 50 to study A Levels and GCSE Graphic Products or Product Design Grade B
Their versionFree
East of England13
Leigh-On-Sea · 2 years
They ask for: GCSE Design and Technology grade 5 or subject to submission of a portfolio if not studied at GCSE. Additionally students must also have a GCSE Science grade 4 a
Felixstowe · 2 years
They ask for: 4-5 GCSEs including maths and English at grde 4 (C) or above.
Their versionFreeKing Edward Vi Grammar School, Chelmsford
Chelmsford · 2 years
They ask for: The requirements for admission into Year 12 are: 1. An average GCSE/IGCSE points score of at least 6.4375 across the best eight subjects. This will be calculate
Kings Langley · 2 years
They ask for: A grade C or above at GCSE Design and Technology is essential.
Their versionFreeSawbridgeworth · 2 years
They ask for: see website
Their versionFreeChelmsford · 2 years
They ask for: Students should have undertaken a design-based subject at GCSE and obtained at least a grade 6.
Their versionFreeNotre Dame High School, Norwich
Norwich · 2 years
They ask for: 42 points from your best 8 subjects; GCSE Maths and English (Language or Literature) at a minimum of grade 4, in addition to: A GCSE in this subject is desirabl
Their versionFreeBushey · 2 years
They ask for: Grade 6 in a Design and Technology GCSE subject and a grade 5 in GCSE Mathematics
Sheringham · 2 years
They ask for: At least two GCSEs at grade 6 or above, including one in a Design & Technology subject, and three at grade 4 or higher.
Their versionFreeWestcliff-On-Sea · 24 months
They ask for: You will need to accrue at least 52 points from your eight best GCSE grades, where numerical grades = face value & A*=9, A=8, B=7. Short course GCSEs may be inc
Their versionFreeWestcliff-On-Sea · 2 years
They ask for: 6 GSCE Grade 9 to 5 (inc En & Ma)
Their versionFreeThomas Mills High School & Sixth Form
Woodbridge · 2 years
They ask for: GCSE Grade 5 or equivalent in a creative subject
Their versionFreeWymondham · 18 months
They ask for: GCSE Grade 6 or above in a Technology subject.
Their versionFree
North West8
Stoke-On-Trent · 20 months
They ask for: Garde 4 in GCSE Design and Technology or Level 2 Merit in Engineering. If not studied before at least one grade 4 in maths.
Their versionFreeAltrincham Grammar School For Boys
Altrincham · 2 years
They ask for: you must meet the AGSB Sixth Form Entry requirements
Their versionFreeLiverpool · 2 years
They ask for: The minimum academic requirement for entry to sixth form at Liverpool College is six GCSE passes at grade C or above including English and Mathematics. Some cou
24 months
They ask for: 5 grade 4 at GCSE level including a grade 4 in a D&T Product Design or Art subject if previously studied. A grade 4 or above in maths is required if not previou
Their versionFreeThe Bishops' Blue Coat Church of England High School
Chester · 2 years
They ask for: Grade 6 in GCSE Design Technology or grade Merit or above in Engineering Studies
Their versionFreeMacclesfield · 2 years
Entry requirements not listed.
Their versionFreeKendal · 2 years
They ask for: 5 GCSEs at grade 5 or above including English and Maths, 5 in GCSE Design Technology and Maths.
Their versionFreeEllesmere Port · 24 months
They ask for: 4+ in GCSE Product Design, Engineering or Art
Their versionFree
South West7
Beaminster · 2 years
They ask for: DT Grade 5 or equivalent qualification
Their versionFreeGloucester · 2 years
They ask for: Students entering this Pathway will have a GCSE point score of above 5.0 in five or more subjects . In the Applied A Level Pathway, a student will be expected t
Their versionFreeChurchill Academy & Sixth Form
Winscombe · 2 years
They ask for: Standard Sixth Form entry (3 GCSEs at Grade 5 and 2 GCSEs at Grade 4). A GCSE Grade 5 in an art or design technology is desirable.
St Edward'S Roman Catholic/Church of England School, Poole
Poole · 2 years
They ask for: Grade 5 in the following GCSE subjects: Graphic Products, Resistant Materials, Product Design, Engineering, Food Technology, Textiles, Business or Art and Desig
Their versionFreeMarlborough · 2 years
They ask for: You will be considered a serious candidate if you have grade B or above in GCSE Design and Technology or another equivalent qualification. You will have demonst
Their versionFreeGloucester · 2 years
They ask for: Grade 6 in a Design and Technology based GCSE.
Their versionFreeWyedean School and Sixth Form Centre
Chepstow · 2 years
They ask for: Entry requirements can be found here https://www.wyedean.gloucs.sch.uk/Sixth-Form/Curriculum/
Their versionFree
West Midlands5
Sutton Coldfield · 24 months
They ask for: Grade 7 at GCSE
Their versionFreeJohn Henry Newman Catholic College
Birmingham · 2 years
They ask for: Students will be at a significant advantage if they have studied a Design Technology subject at GCSE. A large proportion of the assessment is written, and there
Their versionFreeEvesham · 2 years
They ask for: All students starting courses in Year 12 must have a minimum of 30 points across their best six GCSEs, and must have achieved the government's recommended thres
Their versionFreeMalvern · 2 years
Entry requirements not listed.
Their versionFreeWednesbury · 2 years
They ask for: 5+ GCSEs 9-5 including English GCSE Design and Technology 5+
Yorkshire and The Humber5
Hornsea School and Language College
Hornsea · 2 years
They ask for: GCSE Grade 4 + in GCSE Design & Technology However students without a GCSE in the subject will also be considered, please speak to Mrs Field for further informa
Their versionFreeSheffield · 2 years
They ask for: You would benefit most from a GCE in Design Engineering if you have already studied Design & Technology at GCSE and achieved a grade A* to B.
Their versionFreeNorth Yorkshire · 2 years
They ask for: 5 GCSEs at grade 5 or above, which must include: GCSE Design & Technology Grade 5 or Art and Design Grade 6
Their versionFreeMiddlesbrough · 2 years
They ask for: Applicants must have at least 5 GCSE passes at grade 4 and above, including English Language and Mathematics.
Their versionFreeWakefield · 2 years
They ask for: See school website
Their versionFree
North East3
24 months
They ask for: Students must achieve 5 qualifications at Grade 4 or above to return to 6th Form at PCHS.
Their versionFreeSt Robert of Newminster Catholic School and Sixth Form College
2 years
They ask for: Five passes in GCSE at grade 4 or above. One of the five passes will include English at grade 4 or higher.
Their versionFreeNewcastle Upon Tyne · 2 years
They ask for: Grade 4 in GCSE DT or evidence of ability